Kelly
SCOTON Kellys are made from 4145H modified alloy steel in accordance with API Spec.7-1 latest edition, which are quenched and tempered along full length. A hardness range of 285 to 341 BHN and a minimum impact value of 54 Joules as per ASTM A 370 Charpy-V, these values are guaranteed one inch below the surface. SCOTON kelly bars are inspected by an ultrasonic unit over their full length and full section. The wall thickness of each flat of the drive section is verified ultrasonically. All kellys¡¯ connectons are fitted with pressed steel thread protectors on both ends and each kellys would be shipped with steel scabbard for marine transportation.
Specification for Square Kelly
Nom Size (in) |
Lengths (ft) |
Top Upset Joint |
Bottom Upset |
Bore |
Drive Section |
Weight (kg) |
Standard |
Optional |
A |
B |
LH Connection |
OD C |
LH Connection |
OD C |
RH Connection |
OD D |
E |
F |
G |
Standard |
Optional |
(in) |
(in) |
(in) |
(in) |
(in) |
(in) |
2 1/2 |
40 46 |
37 43 |
6 5/8 Reg |
7 3/4 |
4 1/2 Reg |
5 3/4 |
NC26 (2 3/8 IF) |
3 3/8 |
1 1/4 |
3 1/4 |
2 1/2 |
410 465 |
360 420 |
3 |
40 46 |
37 43 |
6 5/8 Reg |
7 3/4 |
4 1/2 Reg |
5 3/4 |
NC31 (2 7/8 IF) |
4 1/8 |
1 3/4 |
3 7/8 |
3 |
495 560 |
450 515 |
3 1/2 |
404654 |
37 43 51 |
6 5/8 Reg |
7 3/4 |
4 1/2 Reg |
5 3/4 |
NC38 (3 1/2 IF) |
4 3/4 |
2 1/4 |
4 3/7 |
3 1/2 |
600 670 780 |
555 630 730 |
4 1/4 |
404654 |
37 43 51 |
6 5/8 Reg |
7 3/4 |
4 1/2 Reg |
5 3/4 |
NC46(4 IF)orNC50(4 1/2 IF) |
6or6 3/8-6 1/2 |
2 4/5 |
5 1/2 |
4 1/4 |
825 940 1070 |
780 890 1040 |
5 1/4 |
40 46 54 |
37 43 51 |
6 5/8 Reg |
7 3/4 |
-- |
-- |
NC50or 5 1/2 FH orNC56 |
7 |
3 1/4 |
6 3/4 |
5 1/4 |
1250 1430 1670 |
-- |
6 |
40 46 54 |
37 43 51 |
6 5/8 Reg |
7 3/4 |
-- |
-- |
6 5/8 FH |
8 |
3 1/2 |
7 5/8 |
6 |
1670 1920 2250 |
-- |
Specification for Hex kellys
Nom Size (in) |
Lengths (ft) |
Top Upset Joint |
Bottom Upset |
Bore |
Drive Section |
Weight (kg) |
Standard |
Optional |
A |
B |
LH Connection |
OD C |
LH Connection |
OD C |
RH Connection |
OD D |
E |
F |
G |
Standard |
Optional |
(in) |
(in) |
(in) |
(in) |
(in) |
(in) |
3 |
40 46 |
37 43 |
6 5/8 Reg |
7 3/4 |
4 1/2 Reg |
5 3/4 |
NC26 (2 3/8 IF) |
3 3/8 |
1 1/4 |
3.375 |
3 |
450 500 |
400 555 |
3 1/2 |
40 46 54 |
37 43 51 |
6 5/8 Reg |
7 3/4 |
4 1/2 Reg |
5 3/4 |
NC31 (2 7/8 IF) |
4 1/8 |
1 3/4 |
3.937 |
3 1/2 |
580 670 780 |
535 620 730 |
4 1/4 |
40
46
54 |
37 43 51 |
6 5/8 Reg |
7 3/4 |
4 1/2 Reg |
5 3/4 |
NC38 (3 1/2 IF) |
4 3/4 |
2 1/4 |
4.781 |
4 1/4 |
750 840 980 |
700 800 940 |
5 1/4 |
40 46 54 |
37 43 51 |
6 5/8 Reg |
7 3/4 |
-- |
-- |
NC46(4 IF)orNC50(4 1/2 IF) |
6or6 3/8-6 1/2 |
2 13/16or3 1/4 |
5.9 |
5 1/4 |
1020 1170 1350 |
-- |
6 |
40 46 54 |
37 43 51 |
6 5/8 Reg |
7 3/4 |
-- |
-- |
NC50or 5 1/2 FH orNC56 |
7 |
3 1/2 |
6.812 |
6 |
1320 1500 1770 |
-- |